Gauge Amerongen beneden: current water level and draft

Lek · km 922.54

Measurement190cm05:10 · +10 cm/24hRule of thumb—cmDraft—cm

Water level at the Amerongen beneden gauge

On 25/10/2026 at 05:10 the Amerongen beneden gauge read 190 cm, 10 cm higher than 24 hours earlier. Source: Rijkswaterstaat.

Gauge Amerongen beneden is on the Lek at kilometre 922.54, on the km 922.5–939.8 stretch.

Fairway depth and rule of thumb

The OLR is 255 cm and the fairway depth aimed for below it (TuOLR) is 350 cm; after a safety margin of 30 cm, the targeted official rule of thumb comes to Amerongen beneden +65.

In practice Amerongen beneden +65 is used here.

Note that Rijkswaterstaat publishes an MGD (Minst Gepeilde Diepte, least sounded depth). It always takes precedence, and unlike in Germany, no legal rights can be derived from the official rule of thumb.

Forecasts and neighbouring gauges

This gauge has one forecast source: the 5-day forecast from Rijkswaterstaat RWsOS (red). Upstream lies Amerongen boven, downstream Culemborg brug. Connected by canal to Tiel.

Reference planes

The reference planes at the Amerongen beneden gauge, evaluated at the gauge's position.

  • OLR+2.55 m NAP
    OLR 2022
    Area: Neder-Rijn/Lek, stuwpand Amerongen - Hagestein
    Source: Rijkswaterstaat; RWS OLR 2022 report (open.rijkswaterstaat.nl/@253564); 2022-01-01

Amerongen beneden

On the route from the Amsterdam-Rijnkanaal to, for example, Wageningen, the MGD for the stretch Heteren to Amsterdam-Rijnkanaal applies. The bottleneck is at the ferry between Wijk and Rijswijk, on the left bank. The deepest channel is along the right bank. The bottom of the shoal on the left bank in the fairway lies at about gauge "Amerongen beneden" + 70 cm. The deep channel along the right bank is 25 to 30 m wide, and its bottom lies at gauge "Amerongen beneden" + 130 cm (subject to change, of course). This channel may not be fully usable when the ferry is on the right bank. The entrance to the approach channel of the Amerongen lock can also be somewhat shallow.
Rules of thumb per gauge and port ›